Managing Configuration Scripts (Sftp) - Dell PowerEdge M420 Configuration Manual

Command
file user
copy scp://
address hostname
|
file-name
/
Password entry

Managing Configuration Scripts (SFTP)

Beginning in Privileged EXEC mode, use the following commands to
download a configuration script from a remote system to the switch, validate
the script, and activate it.
NOTE:
The startup-config and backup-config files are essentially configuration
scripts and can be validated and applied by using the commands in this section.
Command
user
copy sftp:// @{
address hostname
|
file-name dest-
/ script
name
Password entry
script-
script validate
name
script list
Purpose
ip-
@{ Adds a description to an image file.
path
}/
The file can be one of the following files:
• backup-config
• image
• operational-log
• running-config
file-name
• script
• startup-config
• startup-log
After you enter the copy command, the CLI prompts you
for the password associated with the username.
Purpose
ip-
Downloads the specified script from the remote server to
path
}/ the switch.
After you enter the copy command, the CLI prompts you
for the password associated with the username.
Checks the specified script for syntax errors.
The script is automatically validated when you download it
to the switch. You can validate again with this command.
View the list of available scripts.
Managing Images and Files
379