Diffserv Service Configuration - Dell PowerEdge M420 Configuration Manual

DiffServ Service Configuration

Beginning Privilege Exec mode, use the following commands to associate a
policy with an interface and view related information.
CLI Command
configure
service-policy {in | out}
exit
show diffserv service brief [in | out]
show diffserv service interface
{in | out}
show service-policy {in | out}
1118
Configuring Differentiated Services
policy-map-name
interface
Description
Enter Global Configuration mode.
Attach a policy to an interface in the
inbound or outbound direction.
This command can be used in either
Global Configuration mode (for all
system interfaces) or Interface
Configuration mode (for a specific
interface).
Exit to Privilege Exec mode.
Display all interfaces in the system to
which a DiffServ policy has been
attached.
Display policy service information for
the specified interface, where
replaced by gigabitethernet
unit/slot/port
, tengigabitethernet
unit/slot/port
, or port-channel
channel number
.
Display a summary of policy-oriented
statistics information for all interfaces.
interface
is
port-