Trap Flags - Dell PowerEdge M420 Configuration Manual

Dell powerconnect m8024-k user's configuration guide

Hide thumbs Also See for PowerEdge M420:

Table of Contents

Trap Flags

The Trap Flags page is used to specify which traps you want to enable or

disable. When the condition identified by an active trap is encountered by

the switch, a trap message is sent to any enabled SNMP Trap Receivers, and a

message is written to the trap log.

To access the Trap Flags page, click Statistics/RMON → Trap Manager →

Trap Flags in the navigation panel.

Figure 12-15. Trap Flags

Configuring SNMP