Dell PowerEdge M420 Configuration Manual page 1047

Command
vr-id
vrrp timers {learn |
seconds
advertise }
vr-id
vrrp authentication
key
{none | simple
vr-id
vrrp mode
vr-id
vrrp track interface
vlan-id
vlan [decrement
priority
]
vr-id
vrrp track ip route
ip-address/prefix-length
priority
[decrement
CTRL + Z
vr-id
show vrrp [ ]
show vrrp brief
show vrrp interface
vlan-id
{brief | vlan
[stats]}
Purpose
Configure the VRRP timer settings.
Use the keyword learn to enable VRRP to learn the
advertisement timer interval of the master router.
Use the keyword advertise to set the frequency, in seconds,
that an interface on the specified virtual router sends a
virtual router advertisement.
Set the authorization details value for the virtual router
} configured on a specified interface.
vr-id
• — The virtual router identifier. (Range: 1-255)
• none — Indicates authentication type is none.
• simple — Authentication type is a simple text password.
key
• — The key for simple authentication. (Range: String
values)
Enable the virtual router configured on an interface, which
starts the virtual router.
Specify an interface the virtual router (
interface will track. If the interface goes down, the virtual
router priority is decreased by the amount specified by the
priority
value.
Specify a route that the virtual router (
interface will track. If the route to the destination network
] specified by the
removed from the routing table, the virtual router priority
is decreased by the amount specified by the
Exit to Privileged EXEC mode.
View settings for all VRRP groups or for the specified
VRRP group for the switch.
View a summary of interfaces configured to participate in
VRRP groups.
View information about VRRP settings configured on all
interfaces or on the specified interface. If you specify an
interface, use the keyword stats to view VRRP statistics for
the interface.
ip-address/prefix-length
Configuring VRRP
vr-id
) on the
vr-id
) on the
variable is
priority
value.
1047