Configuring Ospf Features (Cli); Configuring Global Ospf Settings - Dell PowerEdge M420 Configuration Manual

Dell powerconnect m8024-k user's configuration guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Configuring OSPF Features (CLI)

This section provides information about the commands you use to configure
and view OSPF settings on the switch. This section does not describe all
available show commands. For more information about all available OSPF
commands, see the
Reference Guide

Configuring Global OSPF Settings

Beginning in Privileged EXEC mode, use the following commands to
configure various global OSPF settings for the switch.
Command
configure
router ospf
ip-address
router-id
auto-cost reference-
ref_bw
bandwidth
capability opaque
compatible rfc1583
PowerConnect M6220/M6348/M8024/M8024-k CLI
at support.dell.com/manuals.
Purpose
Enter global configuration mode.
Enter OSPF configuration mode.
Set the 4-digit dotted-decimal number that uniquely
identifies the router.
Set the reference bandwidth used in the formula to
compute link cost for an interface:
link cost = ref_bw÷interface bandwidth
ref_bw
The
(Range: 1–4294967).
Allow OSPF to store and flood opaque LSAs. An opaque
LSA is used for flooding user defined information within
an OSPF router domain.
(Optional) Enable compatibility with RFC 1583.
If all OSPF routers in the routing domain are capable of
operating according to RFC 2328, OSPF 1583
compatibility mode should be disabled.
variable is the reference bandwidth in Mbps
Configuring OSPF and OSPFv3
981

Advertisement

Table of Contents
loading

Table of Contents