Default L3 Multicast Values - Dell PowerEdge M420 Configuration Manual

Default L3 Multicast Values

IP and IPv6 multicast is disabled by default. Table 42-2 shows the default
values for L3 multicast and the multicast protocols.
Table 42-2. L3 Multicast Defaults
Parameter
IPv4 Multicast Defaults
L3 Multicast Admin Mode
Maximum Multicast Routing Table
Entries
Static Multicast Routes
Interface TTL Threshold
IGMP Defaults
IGMP Admin Mode
IGMP Version
IGMP Robustness
IGMP Query Interval
IGMP Query Max Response Time
IGMP Startup Query Interval
IGMP Startup Query Count
IGMP Last Member Query Interval
IGMP Last Member Query Count
IGMP Proxy Interface Mode
IGMP Proxy Unsolicited Report Interval 1 second
MLD Defaults
MLD Admin Mode
MLD Version
MLD Query Interval
MLD Query Max Response Time
Default Value
Disabled
2048
None configured
1
Disabled globally and on all interfaces
v3
2
125 seconds
100 seconds
31 seconds
2
1 second
2
Disabled
Disabled globally and on all interfaces
v2
125 seconds
10,000 milliseconds
Managing IPv4 and IPv6 Multicast
1159