show interfaces advertise View a summary of the speeds that are advertised on each
show interfaces detail
Configuring Link Dependencies
Beginning in Privileged EXEC mode, use the following commands to
configure ports that are dependent on the state of other ports.
View a summary of the configuration for all ports.
View configured descriptions for all ports.
View detailed information about the specified port.
Enter Global Configuration mode.
Enter the link-dependency mode to configure a link-
Add member ports to the group.
variable includes the interface type and
number, for example gigabitethernet 1/0/3. You can also
add port channels (LAGs) as members by using the
keyword port-channel followed by an ID.
You can also specify a range of interfaces. For example,
interface gigabitethernet 1/0/8-10,1/0/20 configures
interfaces 8, 9, 10 and 20.
Specify the port(s) upon which the member ports are
dependent. For information about the
see the previous command description.
Configuring Port Characteristics