Configuring Mail Server Settings - Dell PowerEdge M420 Configuration Manual

Configuring Mail Server Settings

Beginning in Privileged EXEC mode, use the following commands to
configure information about the mail server (SMTP host) on the network
that will initially receive the email alerts from the switch and relay them to
the correct recipient.
Command
configure
ip-address
mail-server
security {tlsvl|none}
port {25|465}
username
username
password
password
CTRL + Z
show mail-server all
config
266
Monitoring and Logging System Information
Purpose
Enter Global Configuration mode.
Specify the IP address of the SMTP server on the network
and enter the configuration mode for the mail server.
(Optional) Specify the security protocol to use with the
mail server.
Configure the TCP port to use for SMTP, which can be 25
(SMTP) or 465 (SMTP over SSL).
If the SMTP server requires authentication, specify the
username to use for the switch.
The same username and password settings must be
configured on the SMTP host.
If the SMTP server requires authentication from clients,
specify the password to associate with the switch
username.
Exit to Privileged EXEC mode.
View mail server configuration information for all
configured mail servers.