Dell PowerEdge M420 Configuration Manual page 531

Dell powerconnect m8024-k user's configuration guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Command
dot1x timeout supp-
seconds
timeout
count
dot1x max-req
users
dot1x max-users
CTRL + Z
dot1x re-authenticate
interface
[
]
dot1x initialize
interface
[
]
show dot1x [interface
interface]
show dot1x interface
interface
statistics
Purpose
Set the time that the switch waits for a response before
retransmitting an Extensible Authentication Protocol
(EAP)-request frame to the client.
Set the maximum number of times that the switch sends
an Extensible Authentication Protocol (EAP)-request
frame (assuming that no response is received) to the client
before restarting the authentication process.
Set the maximum number of clients supported on the port
when MAC-based 802.1X authentication is enabled on the
port.
Exit to Privileged EXEC mode.
Manually initiate the re-authentication of all 802.1X-
enabled ports or on the specified 802.1X-enabled port.
interface
The
variable includes the interface type and
number.
Start the initialization sequence on all ports or on the
specified port.
NOTE:
This command is valid only if the port-control mode
for the specified port is auto or MAC-based.
View 802.1X settings for the switch or for the specified
interface.
View 802.1X statistics for the specified interface.
Configuring 802.1X and Port-Based Security
531

Advertisement

Table of Contents
loading

Table of Contents