Configuring ISDP and LLDP (CLI)
This section provides information about the commands you use to manage
and view the device discovery protocol features on the switch. For more
information about these commands, see the
M6220/M6348/M8024/M8024-k CLI Reference Guide
Configuring Global ISDP Settings
Beginning in Privileged EXEC mode, use the following commands to
configure ISDP settings that affect the entire switch.
Discovering Network Devices
Enter Global Configuration mode.
Administratively enable ISDP on the switch.
Allow the switch to send ISDPv2 packets.
Specify the number of seconds the device that receives
ISDP packets from the switch should store information
sent in the ISDP packet before discarding it.
Specify the number of seconds to wait between sending
new ISDP packets.
Exit to Privileged EXEC mode.
View global ISDP settings.