Dell PowerEdge M420 Configuration Manual page 236

Dell powerconnect m8024-k user's configuration guide

Hide thumbs Also See for PowerEdge M420:

Table of Contents

4 View information about the authentication profiles. By default, Console

(serial) access uses the defaultList authentication. The defaultList does

not require authentication, but the networkList requires authentication by

verifying the user name and password against an entry in the local

console#show authentication methods

---------------------------------

Enable Authentication Method Lists

----------------------------------

5 Configure the serial port for network (local) authentication. Telnet and

SSH are already configured for password lockout because it has been

globally enabled, and Telnet and SSH use the networkList authentication

console#configure

console(config)#line console

console(config-line)#login authentication

console#exit

console>logout

Controlling Management Access

-----------------

Enable Method List

------------------