Monitoring System Information And Configuring Logging (Cli); Viewing System Information; Running Cable Diagnostics - Dell PowerEdge M420 Configuration Manual

Monitoring System Information and Configuring
Logging (CLI)
This section provides information about the commands you use to configure
information you use to monitor the PowerConnect
M6220/M6348/M8024/M8024-k switch. For more information about these
commands, see the
Reference Guide

Viewing System Information

Beginning in Privileged EXEC mode, use the following commands to view
system health and resource information.
Command
show system
show system power
show system
temperature
show memory cpu
show process cpu

Running Cable Diagnostics

Beginning in Privileged EXEC mode, use the following commands to run the
cable diagnostic tests.
NOTE:
Cable diagnostics may give misleading results if green mode is enabled
on the port. Disable green mode prior to running any cable diagnostics.
262
Monitoring and Logging System Information
PowerConnect M6220/M6348/M8024/M8024-k CLI
at support.dell.com/manuals.
Purpose
Display various system information.
Displays the power supply status.
Displays the system temperature and fan status.
Displays the total and available RAM space on the switch.
Displays the CPU utilization for each process currently
running on the switch.