Dell PowerEdge M420 Configuration Manual page 319

Dell powerconnect m8024-k user's configuration guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Command
ip_address
sntp server {
hostname
} [priority
priority
key_id
] [key
sntp
{unicast|broadcast}
client enable
sntp client poll timer
seconds
CTRL + Z
show sntp configuration Verify the SNTP configuration.
show sntp status
Purpose
|
Define the SNTP server.
ip_address
]
server to poll. The IP address can be an IPv4 or IPv6
address.
priority
—(Optional) If multiple SNTP servers are
defined, this number determines which server the switch
polls first. The priority is 1–8, where 1 is the highest
priority. If you do not specify a priority, the servers are
polled in the order that they are entered.
key_id
—(Optional) Enter an authentication key to use.
The key must be previously defined by the sntp
authentication-key command.
This command enables the SNTP client and allows the
switch to poll configured unicast SNTP servers for updates
or receive broadcasts from any SNTP server.
Specify how often the SNTP client requests SNTP packets
from the configured server(s).
seconds
—The poll interval can be 64, 128, 256, 512, or
1024 seconds.
Exit to Privileged EXEC mode.
View information about the SNTP updates.
—The IP address (or host name) of the SNTP
Managing General System Settings
319

Advertisement

Table of Contents
loading

Table of Contents