show ipv6 mld interface [vlan
show ip igmp interface stats [vlan
show ip igmp groups [interface
show ip igmp membership
Configuring and Viewing MLD Proxy
Beginning in Privileged EXEC mode, use the following commands to
configure the upstream VLAN routing interface as an MLD proxy. The MLD
proxy issues host messages on behalf of the hosts that have been discovered
on the downstream MLD-enabled interfaces. The upstream interface is the
interface closest to the root multicast router, which should be running IGMP .
Configure only the upstream interface as the MLD proxy. MLD should be
enabled on all downstream interfaces. IPv6 routing must be enabled on the
switch for the MLD proxy feature to operate.
ipv6 mld-proxy reset-status
ipv6 igmp-proxy unsolicit-rprt-
CTRL + Z
Managing IPv4 and IPv6 Multicast
View MLD information for all interfaces or for
the specified interface.
View MLD statistics for all interfaces or for the
View the registered multicast groups on the
View the list of interfaces that have registered in
any multicast group.
Enter global configuration mode.
Enter Interface Configuration mode for the
Configure the interface as an MLD proxy
(Optional) Reset the host interface status
parameters of the MLD Proxy.
Configure the unsolicited report interval for the
MLD proxy interface.
The range for
Exit to Privileged EXEC mode.
is 0–260 seconds.