Configuring 802.1X Settings For Radius-Assigned Vlans - Dell PowerEdge M420 Configuration Manual

Configuring 802.1X Settings for RADIUS-Assigned VLANs

Beginning in Privileged EXEC mode, use the following commands to
configure 802.1X settings that affect the RADIUS-assigned VLAN.
Command
configure
aaa authorization
network default radius
aaa authorization
network dynamic-vlan
radius
interface
interface
dot1x guest-vlan
dot1x unauth-vlan
id
CTRL + Z
show dot1x advanced
interface
532
Configuring 802.1X and Port-Based Security
Purpose
Enter Global Configuration mode.
Allow the RADIUS server to assign VLAN IDs to clients.
If the RADIUS assigned VLAN does not exist on the
switch, allow the switch to dynamically create the assigned
VLAN.
Enter interface configuration mode for the specified
interface. The
and number, for example gigabitethernet 1/0/3.
You can also specify a range of interfaces with the interface
range command, for example, interface range
gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,
and 12.
vlan-id
Specify the guest VLAN.
vlan-
Specify the unauthenticated VLAN. The VLAN must
already have been created.
Exit to Privileged EXEC mode.
View the current 802.1X configuration.
interface
variable includes the interface type