Configuring A Time Range - Dell PowerEdge M420 Configuration Manual

Command
CTRL + Z
show ipv6 access-lists
name
[ ]

Configuring a Time Range

Beginning in Privileged EXEC mode, use the following commands to create a
time range and configure time-based entries for the time range.
Command
configure
name
time-range
absolute {[start
date time date
] [end
568
Configuring Access Control Lists
Purpose
Exit to Privileged EXEC mode.
Display all IPv6 access lists and all of the rules that are
defined for the IPv6 ACL. Use the optional
parameter to identify a specific IPv6 ACL to display.
Purpose
Enter global configuration mode.
Create a named time range and enter the Time-Range
Configuration mode for the range.
time
Configure a nonrecurring time entry for the named time
]} range.
time date
• start
going into effect. The time is expressed in a 24-hour
clock, in the form of hours:minutes. For example, 8:00 is
8:00 am and 20:00 is 8:00 pm. The date is expressed in
the format day month year. If no start time and date are
specified, the configuration statement is in effect
immediately.
time date
• end
longer in effect.
— Time and date the ACL rule starts
— Time and date the ACL rule is no
name