Configuring Llpf - Dell PowerEdge M420 Configuration Manual

Configuring LLPF

Beginning in Privileged EXEC mode, use the following commands to
configure LLPF settings.
Command
configure
interface
interface
service-acl input
{blockcdp | blockvtp |
blockdtp | blockudld |
blockpagp | blocksstp |
blockall}
CTRL + Z
show service-acl
interface
interface {
all}
Purpose
Enter global configuration mode.
Enter interface configuration mode for the specified
interface. The
and number, for example gigabitethernet 1/0/3.
You can also specify a range of interfaces with the interface
range command, for example, interface range
gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,
and 12.
Use the appropriate keyword, or combination of keywords
to block any (or all) of the following PDUs on the
interface:
• VTP
• DTP
• UDLD
• PAgP
• SSTP
• All
Exit to Privileged EXEC mode.
View information about the blocked PDUs on the
| specified interface or all interfaces.
Configuring Port-Based Traffic Control
interface
variable includes the interface type
709