Viewing Slot Information - Dell PowerEdge M420 Configuration Manual

Command
clock summer-time
date month
date {
month date year
}
hh:mm date month
{
month dat year
e}
hh:mm offset
[offset
acronym
[zone ]
CTRL + Z
show clock [detail]

Viewing Slot Information

Use the following commands to view information about Slot 0 and its
support.
Command
show slot
show supported cardtype Display information about the modules the switch
Purpose
Use this command if the summer time does not start and
| end every year according to a recurring pattern. You can
enter the month and then the date, or the date and then the
| month.
date
• — Day of the month. (Range: 1-31.)
]
month
• — Month. (Range: The first three letters by name)
hh:mm
• — Time in 24-hour format in hours and minutes.
(Range: hh: 0–23, mm: 0–59)
offset
• — Number of minutes to add during the
summertime. (Range:1–1440)
acronym
• — The acronym for the time zone to be displayed
when summertime is in effect. (Range: Up to four
characters)
Exit to Privileged EXEC mode.
View information about the time. Include the detail
keyword to view information about the time zone and
summer time.
Purpose
Display status information about the expansion slots.
supports.
Managing General System Settings
321