Dell PowerEdge M420 Configuration Manual page 689

4 Specify the TLV information to be included in the LLDP PDUs
transmitted from port 1/0/3.
console(config-if-Gi1/0/3)#lldp transmit-tlv sys-
name sys-desc sys-cap port-desc
5 Set the port description to be transmitted in LLDP PDUs.
console(config-if-Gi1/0/3)#description "Test Lab
Port"
6 Exit to Privileged EXEC mode.
console(config-if-Gi1/0/3)# <CTRL + Z>
7 View global LLDP settings on the switch.
console#show lldp
LLDP Global Configuration
Transmit Interval..................... 60 seconds
Transmit Hold Multiplier.............. 5
Reinit Delay.......................... 3 seconds
Notification Interval................. 5 seconds
8 View summary information about the LLDP configuration on port 1/0/3.
console#show lldp interface gi1/0/3
LLDP Interface Configuration
Interface Link
--------- ------
Gi1/0/3 Down
TLV Codes: 0- Port Description,
2- System Description, 3- System Capabilities
9 View detailed information about the LLDP configuration on port 1/0/3.
console#show lldp local-device detail gi1/0/3
LLDP Local Device Detail
Interface: Gi1/0/3
Transmit Receive
-------- --------
Enabled Enabled
Discovering Network Devices
Notify
--------
Enabled
1- System Name
TLVs Mgmt
------- ----
0,1,2,3 Y
689