Configuring Remote Logging - Dell PowerEdge M420 Configuration Manual

Configuring Remote Logging

Beginning in Privileged EXEC mode, use the following commands to define a
remote server to which the switch sends log messages.
Command
configure
ip-address
logging {
hostname
}
description
description
severity
level
udp-port
port
CTRL + Z
show syslog-servers
Purpose
Enter Global Configuration mode.
| Define a remote log server and enter the configuration
mode for the specified log server.
Describe the log server. Use up to 64 characters. If the
description includes spaces, surround it with quotation
marks.
Specify the severity level of the logs that should be sent to
the remote log server. For information about severity
levels, see Table 10-1.
Specify the UDP port to use for sending log messages. The
range is 1 to 65535, and the default is 514.
Exit to Privileged EXEC mode.
Verify the remote log server configuration.
Monitoring and Logging System Information
265