Dell PowerEdge M420 Configuration Manual page 617

Command
switchport forbidden
vlan-
vlan {add
list vlan-list
|remove
gvrp registration-forbid
gvrp vlan-creation-
forbid
exit
vlan database
vlan-id
vlan makestatic
CTRL + Z
show gvrp configuration Display GVRP configuration information. Timer values are
Purpose
(Optional) Forbids adding the specified VLANs to a port.
To revert to allowing the addition of specific VLANs to the
} port, use the remove parameter of this command.
vlan-list
add
forbidden list. Separate nonconsecutive VLAN IDs with a
comma and no spaces. Use a hyphen to designate a range
of IDs.
vlan-list
remove
the forbidden list. Separate nonconsecutive VLAN IDs
with a comma and no spaces. Use a hyphen to designate a
range of IDs.
(Optional) Deregister all VLANs on a port and prevent any
dynamic registration on the port.
(Optional) Disable dynamic VLAN creation.
Exit to global configuration mode.
Enter VLAN database mode.
(Optional) Change a dynamically created VLAN (one that
is created by GVRP registration) to a static VLAN (one
that is permanently configured and defined).
vlan-id
— Valid vlan ID. Range is 2-4093.
Exit to Privileged EXEC mode.
displayed. Other data shows whether GVRP is enabled and
which ports are running GVRP.
— List of valid VLAN IDs to add to the
— List of valid VLAN IDs to remove from
Configuring VLANs
617