Dell PowerEdge M420 Configuration Manual page 842

Command
hashing-mode
CTRL + Z
show interfaces port-
port-channel
channel [
number
]
show statistics port-
port-channel-
channel
number
842
Configuring Link Aggregation
Purpose
mode
Set the hashing algorithm on the LAG.
mode
The
correspond to the following algorithms:
• 1 — Source MAC, VLAN, EtherType, source module, and
port ID
• 2 — Destination MAC, VLAN, EtherType, source
module, and port ID
• 3 — Source IP and source TCP/UDP port
• 4 — Destination IP and destination TCP/UDP port
• 5 — Source/destination MAC, VLAN, EtherType, and
source MODID/port
• 6 — Source/destination IP and source/destination
TCP/UDP port
• 7 — Enhanced hashing mode
Exit to Privileged EXEC mode.
View LAG information for the specified LAG or for all
LAGs.
View interface statistics for the specified LAG.
value is a number from 1 to 7. The numbers