Figure 11-12. Port Aggregator Port Configuration Summary
3 To modify the port assignment, click any Modify link to access the Port
4 If the system supports stacking, select the stack member to configure from
the Unit field.
5 Enter the Port Aggregator Group ID in the Group ID field for the ports to
add to a group.
Each port can only belong to only one Port Aggregator group.
6 Click Apply.
Removing Ports from an Aggregator Group
To remove a port from an aggregator group:
1. Open the Port Configuration Summary page.
2 Select the Remove option for the group with the ports to remove.
3 Click Apply.
All ports assigned to the Port Aggregator group are removed from the
group and are not assigned to any group.
Configuration page, delete the group ID from the port's Group ID field, and
then click Apply.
To delete a single port from a group, click Modify to access the Port
Managing General System Settings