Figure 15-18. Add an Event Entry
3 If the event sends an SNMP trap, specify the SNMP community to receive
4 Optionally, provide a description of the event and the name of the event
5 Select an event type.
6 Click Apply.
The event is added to the RMON Event Table, and the device is updated.
Viewing, Modifying, or Removing an RMON Event
To manage an event:
1 Open the RMON Event Control page.
2 Click Show All to display the Event Control Table page.
3 To edit an entry:
Select the Edit check box in for the event entry to change.
Modify the fields on the page as needed.
4 To remove an entry, select the Remove check box in for the event entry to
5 Click Apply.
Monitoring Switch Traffic