Configuring SNMP (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring the SNMP agent on a
PowerConnect M6220/M6348/M8024/M8024-k switch. For details about the
fields on a page, click
NOTE:
For some features, the control to enable or disable traps is available from
a configuration page for that feature and not from the Trap Manager pages that
this chapter describes.
SNMP Global Parameters
Use the Global Parameters page to enable SNMP and Authentication
notifications.
To display the Global Parameters page, click System → SNMP → Global
Parameters in the navigation panel.
Figure 12-1. SNMP Global Parameters
at the top of the page.
Configuring SNMP
331