Configuring Rmon - Dell PowerEdge M420 Configuration Manual

Command
CTRL + Z
show sflow agent
index
show sflow
destination
index
show sflow polling View information about the configured sFlow poller
index
show sflow
sampling

Configuring RMON

Beginning in Privileged EXEC mode, use the following commands to
configure RMON alarms, collection history, and events. The table also lists
the commands you use to view information collected by the RMON probe.
Command
configure
number
rmon event
community
[log] [trap
string
[description
string
[owner ]
Purpose
Exit to Privileged Exec mode.
View information about the switch sFlow agent.
View information about a configured sFlow receivers.
instances for the specified receiver.
View information about the configured sFlow sampler
instances for the specified receiver.
Purpose
Enter Global Configuration mode
Configure an RMON event.
]
number
•
]
• log — Specify that an entry is made in the log table for
each event.
community
• trap
sent, it is sent to the SNMP community specified by this
octet string. (Range: 0-127 characters)
• description
(Range 0-127 characters)
string
• owner
configured this event. If unspecified, the name is an
empty string.
— The event index. (Range: 1–65535)
— If the event is an SNMP trap to be
string
— A comment describing this event.
— Enter a name that specifies who
Monitoring Switch Traffic
431