Dell PowerEdge M420 Configuration Manual page 1075

Command
ipv6-
ipv6 route
prefix prefix-length
/
preference
[ ]
ipv6 route distance
integer
exit
ipv6-
show ipv6 route [
address ipv6-
|
prefix/prefix-length
protocol interface-type
|
interface-number
] [best]
show ipv6 route summary View summary information about the routing table.
show ipv6 route
preferences
Purpose
Configure a static reject route.
null
Set the default distance (preference) for static IPv6
routes. Lower route preference values are preferred when
determining the best route.
Exit to Global Config mode.
View the routing table.
ipv6-address
•
|
best-matching route would be displayed.
protocol
•
routes. Is one of the following keywords: connected,
ospf, static.
ipv6-prefix/ prefix-length
•
for which the matching route would be displayed.
interface-type interface-number
•
Specifies that the routes with next-hops on the selected
interface be displayed.
• best—Specifies that only the best routes are displayed.
If the connected keyword is selected for protocol, the
best option is not available because there are no best or
non-best connected routes.
View detailed information about the route preferences.
—Specifies an IPv6 address for which the
—Specifies the protocol that installed the
—Specifies an IPv6 network
Configuring IPv6 Routing
—Valid IPv6 interface.
1075