Dell PowerEdge M420 Configuration Manual page 285

Table 11-6. PCM8024 and PCM8024-k Default Port Aggregator Group Mapping
Aggregator Member Internal Ports
Group
Group 1 Te1/0/1, Te1/0/2, Te1/0/3, Te1/0/4, Te1/0/5,
Te1/0/6, Te1/0/7, Te1/0/8, Te1/0/9,
Te1/0/10, Te1/0/11, Te1/0/12, Te1/0/13,
Te1/0/14, Te1/0/15, Te1/0/16
For the PCM6220 and PCM6348 switches, the same default configuration is
extended to each switch in the stack. The default configuration does not
include 10G ports as part of any Aggregator Group, although they can be
configured if desired.
NOTE:
1G and 10G external ports cannot be used at the same time within the
same Aggregator Group.
Managing General System Settings
Member Uplink (External)
Ports
Te1/0/17, Te1/0/18,
Te1/0/19, Te1/0/20
Te1/0/21, Te1/0/22,
Te1/0/23, Te1/0/24
285