Dell PowerEdge M420 Configuration Manual page 722

The Bridge Multicast Group page contains two editable tables:
Unit and Ports — Displays and assigns multicast group membership to
•
ports. To assign membership, click in Static for a specific port. Each click
toggles between S, F, and blank. See Table 25-2 for definitions.
LAGs — Displays and assigns multicast group membership to LAGs. To
•
assign membership, click in Static for a specific LAG. Each click toggles
between S, F, and blank. See Table 25-2 for definitions.
Table 25-2 contains definitions for port/LAG IGMP management settings.
Table 25-2. Port/LAG IGMP Management Settings
Port Control
D
S
F
Blank
Adding and Configuring Bridge Multicast Address Groups
To configure a bridge multicast group:
1 From the Bridge Multicast Group page, click Add.
The Add Bridge Multicast Group page displays.
722
Configuring L2 Multicast Features
Definition
Dynamic: Indicates that the port/LAG was dynamically joined to
the Multicast group (displays in the
Static: Attaches the port to the Multicast group as a static member
Static
in the row. Displays in the
Forbidden: Indicates that the port/LAG is forbidden entry into the
Multicast group in the
Apply is clicked.
Blank: Indicates that the port is not attached to a Multicast group.
Current
Current
Static
row. Displays in the
row).
row once Apply is clicked.
Current
row once