Figure 21-29. Trunk Port Configuration
7 From the Switching → VLAN → VLAN Membership page, verify that
port 1 is marked as a tagged member (T) for each VLAN.
Figure 21-30 shows VLAN 200, in which port 1 is a tagged member, and
ports 16–20 are untagged members.
Figure 21-30. Trunk Port Configuration
8 Configure the MAC-based VLAN information.
Go to the Switching → VLAN → Bind MAC to VLAN page.
In the MAC Address field, enter a valid MAC address, for example
In the Bind to VLAN field, enter 300, which is the Sales VLAN ID.