Configuring a Dynamic Address Pool
Beginning in Privileged EXEC mode, use the following commands to create
an address pool with network information that is dynamically assigned to
hosts with DHCP clients that request the information.
ip dhcp pool
] | ip
CTRL + Z
show ip dhcp pool
Enter Global Configuration mode.
Create a DHCP address pool and enters DHCP pool
Configure the subnet number and mask for a DHCP
address pool. Clients requesting an IP address can be
assigned any non-excluded IP address within this network.
Specify the duration of the lease for an IP address that is
assigned from a DHCP server to a DHCP client.
specify the hours and minutes after specifying the days.
• infinite — 60 day lease
Specify the list of default gateway IP addresses to be
assigned to the DHCP client.
Specify the list of DNS server IP addresses to be assigned
to the DHCP client.
Specify the domain name for a DHCP client.
Manually configure DHCP options.
Exit to Privileged EXEC mode.
View the settings for the specified address pool or for all
configured address pools.
— Days the lease is valid. You can optionally
Configuring DHCP Server Settings