Configuring Protected Ports - Dell PowerEdge M420 Configuration Manual

Command
show interfaces
datacenter-bridging
interface
[ | port-channel
port-channel-id
clear priority-flow-
control statistics
interface
[ | port-channel
port-channel-id

Configuring Protected Ports

Beginning in Privileged EXEC mode, use the following commands to add a
name to a protected port group and add ports to the group.
Command
configure
switchport protected
groupid name
name
interface
interface
switchport protected
groupid
CTRL + Z
show switchport
protected
708
Configuring Port-Based Traffic Control
Purpose
Display the datacenter-bridging configuration, status and
counters for a given interface.
]
Clear all PFC statistics or the PFC statistics for the
specified interface.
]
Purpose
Enter global configuration mode.
Specify a name for one of the three protected port groups.
groupid
•
protected in. (Range: 0-2)
name
•
Enter interface configuration mode for the specified
interface. The
and number, for example gigabitethernet 1/0/3.
Add the interface to the specified protected port group.
Exit to Privileged EXEC mode.
View protected group and port information.
— Identifies which group the port is to be
— Name of the group. (Range: 0-32 characters)
interface
variable includes the interface type