Command Mode
MST Configuration mode
User Guidelines
•
There are no user guidelines for this command.
Example
The following example exits the MST configuration mode without saving changes.
Console(config) # spanning-tree mst configuration
Console(config-mst) # abort
spanning-tree pathcost method
The spanning-tree pathcost method Global Configuration mode command sets the default path
cost method. To revert to the default setting, use the no form of this command.
Syntax
spanning-tree pathcost method {long | short}
no spanning-tree pathcost method
•
long— Specifies 1 through 200,000,000 range for port path costs.
•
short—Specifies 0 through 65,535 range for port path costs.
Default Configuration
Short
Command Mode
Global configuration mode
User Guidelines
•
The cost is set using the spanning-tree cost command.
Example
The following example sets the default path cost method to
Console# spanning-tree pathcost method long
spanning-tree bpdu
The spanning-tree bpdu Global Configuration mode command defines BPDU handling when
spanning-tree is disabled on an interface.
276
Spanning-Tree Commands
"long".