Installation Quick Reference - Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Installation Manual

Installing and Configuring Cisco Secure ACS
Solution Engine 4.1
This chapter describes how to install and initially configure Cisco Secure ACS Solution Engine (ACS
SE) 4.1. It contains:
•
•
•
•
•
•
•
The details in this guide correspond to the CSACSE-1113-K9 platform only.
Note

Installation Quick Reference

Table 3-1
installation and initial configuration, see the User Guide for Cisco Secure ACS for information on how
to use a browser and the web interface to fully configure your ACS SE to provide the AAA services that
you want from this installation.
Table 3-1
Task
Use the rack mount kit to install the
ACS SE in a rack.
Connect the ACS SE to an AC power
source.
Connect network and console cables.
Perform initial configuration of the
ACS SE
OL-9969-03
Installation Quick Reference, page 3-1
Installing the Cisco 1113 in a Rack, page 3-2
Connecting to the AC Power Source, page 3-9
Connecting Cables, page 3-10
Initial Configuration, page 3-10
Verifying the Initial Configuration, page 3-15
Next Steps, page 3-17
provides a high-level overview of the installation and initial configuration process. Following
Quick Reference
C H A P T E R
References
Installing the Cisco 1113 in a Rack,
page 3-2
Connecting to the AC Power Source,
page 3-9
Connecting Cables, page 3-10
Configuring ACS SE, page 3-11
Installation Guide for Cisco Secure ACS Solution Engine 4.1
3
3-1