Ipv6 Mld-Proxy Unsolicit-Rprt-Interval; Ipv6 Mld-Proxy Reset-Status; Show Ipv6 Mld-Proxy - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

ipv6 mld-proxy unsolicit-rprt-interval

Use this command to set the unsolicited report interval for the MLD-Proxy router. This command
is only valid when you enable MLD-Proxy on the interface. The value of <interval> is 1-260
seconds.
Default
1
Format
ipv6 mld-proxy unsolicit-rprt-interval <interval>
Mode Interface Config
no ipv6 mld-proxy unsolicited-report-interval
Use this command to reset the MLD-Proxy router's unsolicited report interval to the default value.
Format
no ipv6 mld-proxy unsolicit-rprt-interval
Mode Interface Config

ipv6 mld-proxy reset-status

Use this command to reset the host interface status parameters of the MLD-Proxy router. This
command is only valid when you enable MLD-Proxy on the interface.
Format
ipv6 mld-proxy reset-status
Mode Interface Config

show ipv6 mld-proxy

Use this command to display a summary of the host interface status parameters.
Format
show ipv6 mld-proxy
Mode • Privileged EXEC
• User EXEC
The command displays the following parameters only when you enable MLD-Proxy.
IPv6 Multicast Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
6-24