Port Lacptimeout (Global Config) - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

port lacptimeout (Interface Config)
This command sets the timeout on a physical interface of a particular device type (actor or
partner) to either long or short timeout.
Default long
Format
port lacptimeout {actor | partner} {long | short}
Mode Interface Config
no port lacptimeout
This command sets the timeout back to its default value on a physical interface of a particular
device type (actor or partner).
Format
no port lacptimeout {actor | partner}
Mode Interface Config

port lacptimeout (Global Config)

This command sets the timeout for all interfaces of a particular device type (actor or partner) to
either long or short timeout.
Default long
Format
port lacptimeout {actor | partner} {long | short}
Mode Global Config
no port lacptimeout
This command sets the timeout for all physical interfaces of a particular device type (actor or
partner) back to their default values.
Format
no port lacptimeout {actor | partner}
Mode Global Config
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-105