Ip Name Server; Ip Host - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no ip domain list
Use this command to delete a name from a list.
Format
no ip domain list <name>
Mode Global Config

ip name server

Use this command to configure the available name servers. Up to eight servers can be defined in
one command or by using multiple commands. The parameter <server-address> is a valid
IPv4 or IPv6 address of the server. The preference of the servers is determined by the order they
were entered.
Format
ip name-server <server-address1> [server-address2...server-address8]
Mode Global Config
no ip name server
Use this command to remove a name server.
Format
no ip name-server [server-address1...server-address8]
Mode Global Config

ip host

Use this command to define static host name-to-address mapping in the host cache. <name> is
host name. <ip address> is the IP address of the host.
Default none
Format
ip host <name> <ipaddress>
Mode Global Config
Utility Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
9-57