clear ipv6 ospf neighbor interface
To drop adjacency with all neighbors on a specific interface, use the optional parameter [unit/slot/
port]. To drop adjacency with a specific router ID on a specific interface, use the optional
parameter [neighbor-id].
Format
clear ipv6 ospf neighbor interface [unit/slot/port] [neighbor-id]
Mode
Privileged EXEC
clear ipv6 ospf redistribution
Use this command to flush all self-originated external LSAs. Reapply the redistribution
configuration and re-originate prefixes as necessary.
Format
clear ipv6 ospf redistribution
Mode
Privileged EXEC
default-information originate (OSPFv3)
This command is used to control the advertisement of default routes.
Default
• metric—unspecified
• type—2
Format
default-information originate [always] [metric <1-16777214>] [metric-
type {1 | 2}]
Mode
Router OSPFv3 Config
no default-information originate (OSPFv3)
This command is used to control the advertisement of default routes.
Format
no default-information originate [metric] [metric-type]
Mode
Router OSPFv3 Config
IPv6 Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
7-47