Show Ipv6 Mld-Proxy Groups Detail - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Field
Last Reporter
Up Time (in secs)
Member State
Filter Mode
Sources
Example: The following shows example CLI display output for the command.
(Switch) #show ipv6 mld-proxy groups
Interface Index................................ 1/0/3
Group Address Last Reporter
Sources
------------- -------------- ---------- ----------------- -------------- ----
---
FF1E::1 FE80::100:2.3
FF1E::2 FE80::100:2.3
FF1E::3 FE80::100:2.3
FF1E::4 FE80::100:2.3

show ipv6 mld-proxy groups detail

Use this command to display information about multicast groups that MLD-Proxy reported.
Format
show ipv6 mld-proxy groups detail
Mode • Privileged EXEC
• User EXEC
IPv6 Multicast Commands
Description
The IP address of the host that last sent a membership report for the current
group, on the network attached to the MLD-Proxy interface (upstream
interface).
The time elapsed in seconds since last created.
Possible values are:
• Idle_Member. The interface has responded to the latest group
membership query for this group.
• Delay_Member. The interface is going to send a group membership
report to respond to a group membership query for this group.
Possible values are Include or Exclude.
The number of sources attached to the multicast group.
Up Time
00:01:40
00:02:40
00:01:40
00:02:44
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
Member State
DELAY_MEMBER
DELAY_MEMBER
DELAY_MEMBER
DELAY_MEMBER
Filter Mode
Exclude 2
Include 1
Exclude 0
Include 4
6-27