Ipv6 Router Ospf; Area Default-Cost (Ospfv); Area Nssa (Ospfv) - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no ipv6 ospf transmit-delay
This command sets the default OSPF Transit Delay for the specified interface.
Format
no ipv6 ospf transmit-delay
Mode Interface Config

ipv6 router ospf

Use this command to enter Router OSPFv3 Config mode.
Format
ipv6 router ospf
Mode Global Config
area default-cost (OSPFv3)
This command configures the monetary default cost for the stub area. The operator must specify
the area id and an integer value between 1–16777215.
Format
area <areaid> default-cost <1-16777215>
Mode Router OSPFv3 Config
area nssa (OSPFv3)
This command configures the specified areaid to function as an NSSA.
Format
area <areaid> nssa
Mode Router OSPFv3 Config
no area nssa(OSPFv3)
This command disables nssa from the specified area id.
Format
no area <areaid> nssa
Mode Router OSPFv3 Config
IPv6 Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
7-38