Ip Http Authentication; Ip Http Session Maxsessions - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

ip http authentication

This command specifies the authentication methods for http server users. The additional methods
of authentication are used only if the previous method returns an error, not if it fails. To ensure that
the authentication succeeds even if all methods return an error, specify none as the final method in
the command line. For example If none specified as an authentication method after radius, no
authentication is used if the radius server is down..
Format
ip http authentication method1 [method2 ...]
Mode Global ConfigC
Term Definition
Local Uses the local username database for authentication.
Radius Uses the list of all RADIUS servers for authentication.
Tacacs Uses the list of all TACACS servers for authentication.
None Uses no authentication.
no ip http authentication
This command restores the authentication methods to the default.
Format
no ip http authentication method1 [method2 ...]
Mode Global Config

ip http session maxsessions

This command limits the number of allowable un-secure HTTP sessions. Zero is the configurable
minimum.
Default 16
Format
ip http session maxsessions <0-16>
Mode Privileged EXEC
Management Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
10-23