Show Authentication Methods; Show Dot1X - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

show authentication methods

This command displays information about the authentication methods.
Format
show authentication methods
Mode Privileged EXEC
The following is an example of this command:
Login Authentication Method Lists
________________________________
Console_Default: None
Network_Default:Local
Enable Authentication Lists
_____________________
Console_Default: Enable None
Network_Default:Enable
Line Login Method List Enable Method Lists
_____________________
Console Console_Default Console_Default
Telnet Network_Default Network_Default
SSH Network_Default Network_Default
http : Local
https : Local
dot1x :

show dot1x

This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending on the
tokens used.
Format
show dot1x [{summary {<unit/slot/port> | all} | detail <unit/slot/
port> | statistics <unit/slot/port>]
Mode Privileged EXEC
If you do not use the optional parameters <unit/slot/port> or <vlanid>, the command
displays the global dot1x mode and the VLAN Assignment mode.
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-72