User Max-Input-Octets; User Max-Output-Octets - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no user max-bandwidth-up
Use this command to reset the limit to the default.
Format
no user
Mode Captive Portal Configuration mode

user max-input-octets

Use this command to limit the number of octets the user is allowed to transmit. After this limit has
been reached the user will be disconnected. <1-128> is the user ID. The range of octets is 0-
4294967295. 0 indicates to use the global limit.
Default 0
Format
user <1-128> max-input-octets octets
Mode Captive Portal Configuration mode
no user max-input-octets
Use this command to reset the limit to the default.
Format
no user <1-128> max-input-octets
Mode Captive Portal Configuration mode

user max-output-octets

Use this command to limit the number of octets the user is allowed to receive. After this limit has
been reached the user will be disconnected. The <1-128> is the user ID. The range of the octets is
0 – 4294967295. 0 indicates to use the global limit.
Default 0
Format
user <1-128> max-output-octets octets
Mode Captive Portal Configuration mode
Captive Portal Commands
<1-128> max-bandwidth-up
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
12-28