Show Ipv6 Mld-Proxy Interface - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Field
Interface Index
Admin Mode
Operational Mode
Version
Number of Multicast Groups
Unsolicited Report Interval
Querier IP Address on Proxy
Interface
Older Version 1 Querier
Timeout
Proxy Start Frequency
Example: The following shows example CLI display output for the command.
(Switch) #show ipv6 mld-proxy
Interface Index............................................. 1/0/3
Admin Mode................................................ Enable
Operational Mode......................................... Enable
Version......................................................... 3
Num of Multicast Groups............................. 0
Unsolicited Report Interval.......................... 1
Querier IP Address on Proxy Interface........ fe80::1:2:5
Older Version 1 Querier Timeout................ 00:00:00
Proxy Start Frequency.................................

show ipv6 mld-proxy interface

This command displays a detailed list of the host interface status parameters. It displays the
following parameters only when you enable MLD-Proxy.
Format
show ipv6 mld-proxy interface
Modes • Privileged EXEC
• User EXEC
IPv6 Multicast Commands
Description
The interface number of the MLD-Proxy.
Indicates whether MLD-Proxy is enabled or disabled. This is a configured
value.
Indicates whether MLD-Proxy is operationally enabled or disabled. This is a
status parameter.
The present MLD host version that is operational on the proxy interface.
The number of multicast groups that are associated with the MLD-Proxy
interface.
The time interval at which the MLD-Proxy interface sends unsolicited group
membership report.
The IP address of the Querier, if any, in the network attached to the upstream
interface (MLD-Proxy interface).
The interval used to timeout the older version 1 queriers.
The number of times the MLD-Proxy has been stopped and started.
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
6-25