Ip Igmp Version; Ip Igmp Last-Member-Query-Count - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

ip igmp version

This command configures the version of IGMP for an interface. The value for <version> is
either 1, 2 or 3.
Default 3
Format
ip igmp version <version>
Modes Interface Config
no ip igmp version
This command resets the version of IGMP to the default value
Format
no ip igmp version
Modes Interface Config

ip igmp last-member-query-count

This command sets the number of Group-Specific Queries sent before the router assumes that
there are no local members on the interface. The range for <count> is 1 to 20.
Format
ip igmp last-member-query-count <count>
Modes Interface Config
no ip igmp last-member-query-count
This command resets the number of Group-Specific Queries to the default value.
Format
no ip igmp last-member-query-count
Modes Interface Config
IP Multicast Commands
Managed Switch CLI Manual, Release 8.0
.
v1.0, July 2009
5-27