Command Completion And Abbreviation; Cli Error Messages - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Table 6. CLI Mode Access and Exit (continued)
Command Mode Access Method
TACACS Config From the Global Config mode,
enter tacacs-server host
<ip-addr>, where <ip-addr> is
the IP address of the TACACS
server on your network.
DHCP Pool From the Global Config mode,
Config enter
ip dhcp pool <pool-name>.
DHCPv6 Pool From the Global Config mode,
Config enter
ip dhcpv6 pool <pool-name>.
Stack Global From the Global Config mode,
Config Mode enter the stack command.
ARP Access-List From the Global Config mode,
Config Mode enter the arp access-list
command.

Command Completion and Abbreviation

Command completion finishes spelling the command when you type enough letters of a command
to uniquely identify the command keyword. Once you have entered enough letters, press the
SPACEBAR or TAB key to complete the word.
Command abbreviation allows you to execute a command when you have entered there are enough
letters to uniquely identify the command. You must enter all of the required keywords and
parameters before you enter the command.

CLI Error Messages

If you enter a command and the system is unable to execute it, an error message appears.
describes the most common CLI error messages.
Using the Command-Line Interface
Managed Switch CLI Manual, Release 8.0
Exit or Access Previous Mode
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-
Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-
Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-
Z.
To exit to the Global Config mode, enter the exit
command. To return to the Privileged EXEC
mode, enter Ctrl-Z.
To exit to the Global Config mode, enter the
exit command. To return to the Privileged
EXEC mode, enter Ctrl-Z.
v1.0, July 2009
Table 7
1-9