Passwords History; Passwords Aging - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

passwords history

Use this command to set the number of previous passwords that shall be stored for each user
account. When a local user changes his or her password, the user will not be able to reuse any
password stored in password history. This ensures that users don't reuse their passwords often. The
valid range is 0-10.
Default 0
Format
passwords history <0-10>
Mode Global Config
no passwords history
Use this command to set the password history to the default value.
Format
no passwords history
Mode Global Config

passwords aging

Use this command to implement aging on passwords for local users. When a user's password
expires, the user will be prompted to change it before logging in again. The valid range is 1-365.
The default is 0, or no aging.
Default 0
Format
passwords aging <1-365>
Mode Global Config
no passwords aging
Use this command to set the password aging to the default value.
Format
no passwords aging
Mode Global Config
Management Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
10-35