Show Ipv6 Ospf Asbr; Show Ipv6 Ospf Database - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Default Metric The metric type for the default route advertised into the NSSA.
Type
Translator Role The NSSA translator role of the ABR, which is always or candidate.
Translator The amount of time that an elected translator continues to perform its duties after it
Stability Interval
determines that its translator status has been deposed by another router.
Translator State Shows whether the ABR translator state is disabled, always, or elected.

show ipv6 ospf asbr

This command displays the internal OSPFv3 routes to reach Autonomous System Boundary
Routers (ASBR). This command takes no options.
Format
show ipv6 ospf asbr
Modes • Privileged EXEC
• User EXEC
Term Definition
Type The type of the route to the destination. It can be either:
• intra — Intra-area route
• inter — Inter-area route
Router ID Router ID of the destination.
Cost Cost of using this route.
Area ID The area ID of the area from which this route is learned.
Next Hop Next hop toward the destination.
Next Hop Intf The outgoing router interface to use when forwarding traffic to the next hop.

show ipv6 ospf database

This command displays information about the link state database when OSPFv3 is enabled. If you
do not enter any parameters, the command displays the LSA headers for all areas. Use the optional
<areaid> parameter to display database information about a specific area. Use the other
optional parameters to specify the type of link state advertisements to display. Use external to
display the external LSAs. Use inter-area to display the inter-area LSAs. Use link to
IPv6 Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
7-59