Snmp-Server Community - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

snmp-server
This command sets the name and the physical location of the switch, and the organization
responsible for the network. The range for <name>, <loc> and <con> is from 1 to 31
alphanumeric characters.
Default none
Format
snmp-server {sysname <name> | location <loc> | contact <con>}
Mode Global Config

snmp-server community

This command adds (and names) a new SNMP community. A community <name> is a name
associated with the switch and with a set of SNMP managers that manage it with a specified
privileged level. The length of <name> can be up to 16 case-sensitive characters.
Note: Community names in the SNMP Community Table must be unique. When making
multiple entries using the same community name, the first entry is kept and
processed and all duplicate entries are ignored.
Default • Public and private, which you can rename.
• Default values for the remaining four community names are blank.
Format
snmp-server community <name>
Mode Global Config
no snmp-server community
This command removes this community name from the table. The <name> is the community
name to be deleted.
Format
no snmp-server community <name>
Mode Global Config
Management Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
10-41