Show Ip Pimsm; Show Ip Pimsm Bsr - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

show ip pimsm

This command displays the system-wide information for PIM-SM.
Format
show ip pimsm
Modes • Privileged EXEC
• User EXEC
Term Definition
Admin Mode Indicates whether PIM-SM is enabled or disabled.
Data Threshold The data threshold rate for the PIM-SM router.
Rate (Kbps)
Register The threshold rate for the RP router to switch to the shortest path.
Threshold Rate
(Kbps)
Interface Valid unit, slot, and port number separated by forward slashes.
Interface-Mode Indicates whether PIM-SM is enabled or disabled on the interface.
Operational- The current state of the PIM-SM protocol on the interface. Possible values are
Status
Operational or Non-Operational.

show ip pimsm bsr

This command displays the bootstrap router (BSR) information. The output includes elected BSR
information and information about the locally configured candidate rendezvous point (RP)
advertisement.
Format
show ip pimsm bsr
Mode • Privileged EXEC
• User EXEC
Term Definition
BSR Address IP address of the BSR.
Uptime Length of time that this router has been up (in hours, minutes, and seconds).
BSR Priority Priority as configured in the ip pimsm bsr-candidate command.
Hash Mask Length of a mask (maximum 32 bits) that is to be ANDed with the group address before
Length
the hash function is called. This value is configured in the ip pimsm bsr-candidate
command.
IP Multicast Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
5-23